Multi Turn Wave Springs with Shim Ends | ISO 9001 & ISO 14001 Certified Metal Springs Manufacturer Since 1987 | Tech Spring Manufacturing Corp.
Tech Spring Manufacturing Corp. is one of the prime Multi Turn Wave Springs with Shim Ends | spring manufacturers based in Taiwan since 1987. ISO accredited and manufacturing all types of springs, stamping molding and assembly of metal parts to Europe, USA, UK & Australia. We are specialized in the manufacturing, designing and analyzing all kinds of spring, such as wave springs (including of compression wave spring, wave single turn and nested spring), linear expander, retaining rings (including of internal, external, single turn and more turns), constant force spring, power springs (including of general and prestressed types), etc. TSMC Multi Turn Wave springs are available with squared-shim ends. In comparison to the plain ends, this shim ends enables contact pressures to be more evenly distributed across all the contact surface. Ideal when uniform force distribution and / or rotational pressure is required over 360°.
Multi Turn Wave Springs with Shim Ends
TSMC Multi Turn Wave springs are available with squared-shim ends. In comparison to the plain ends, this shim ends enables contact pressures to be more evenly distributed across all the contact surface. Ideal when uniform force distribution and / or rotational pressure is required over 360°.
The characteristics of Shim ends is similar to a concept of double-disc grinding springs for a flat surface as the flat end surface allow a consistent distribution of the spring forces, therefore an indentation of the wave heights while mounting parts is avoided thus eliminate an assembly step.
TSMC Multi-turn wave springs include plain-end (wavy) and shim-ends (flat) types. Both types are normally used in low force applications with large deflections which are particularly useful for extremely compact installations and in application where weight needs to be minimized.
Features
Wave Springs reduce spring height by 50%
Same force and deformation as ordinary coil / compression springs
Wave Springs fit radial and axial spaces
We can provide special materials
The load in an axial direction is 100% transferable.
Specification
Stock Sizes
TSMC offer 2 different series form stock
• WSS Series (in)
Inch series available from .374" to 2" in carbon and stainless steel
• WSS Series (mm)
Metric series available from 9.5 to 50.8 in carbon and stainless steel
In additional to above, custom products are a specialty of TSMC, our experienced engineers are always available to assist with valuable consulting services and feasibility analysis, such as custom design assistance, application requirement as well as assistance in selecting the right materials and developing a prototype.
Contact us with the details of your project to discover how we can help.
- Related Products
Multi Turn Wave Springs
Multi Turn (Peak-to Peak) Wave springs are formed by stacking successive round edges of wave...
Details
Interlaced Wave Springs
An Interlaced Wave Spring is consisted of two wave springs with similar thickness, amplitude...
Details
Single Turn Wave Spring
Single-turn wave springs are used for several applications, mainly designed for short deflection...
Details
Round Wire Wave Springs
TSMC Round Wire Wave Springs are manufactured from round-section wire, it can develop higher...
Details
Linear Wave Springs
TSMC Linear Wave Springs are a strip-shaped spring by continuously wave shapes, which has the same...
Details
Nested Wave Springs
Nested Wave Springs is similar to several springs are stacked together to achieve a high load...
Details- Related Materials
Corrosion Resistant
Wire for use in corrosive environments such as gases and liquids. Materials which are resistant to chemical attack in acidic, alkaline or complex environments. If...
Electrical and Electronic
Wire used for High Performance electrical and electronic applications (often in high temperatures), selected for their specific electrical and associated...
Strength
Wire for withstanding high loads and / or stresses and those with good strength to weight ratios. In many cases, mechanical properties can be further increased...
Water Resistant
Wire which performs well in aqueous environments. Materials which are resistant to corrosion in subsea or other application areas; where exposure to moisture...
Heat Resistant
Wire for use in high temperatures where high strength, creep and stress rupture resistance, oxidation resistance or a combination of these is required. If...
Controlled / Low Expansion
Wire which has a low or controlled rate of thermal expansion at room temperature, often used in metal to glass sealing or electronic applications. If you have...
Electrical Resistance Wire
Wire used where linear electrical resistance can be achieved through selection of different sizes and shapes. Often used in heating elements or resistors. If...
Hot Cutting and Sealing
Wire used typically for packaging and cutting applications. Materials which have electrical resistance properties which allow them to efficiently reach...
Sub Zero
Wire which has good mechanical properties in low temperature environments, typically materials will be ductile in nature and have good fracture toughness. If...
Specific Applications
Wire that has properties that lend themselves extremely well to being tailored to very specific applications; examples might include medical devices or watch...
- Files Download
Wave Springs - TSMS41.9 & 40.9 Series (Mechanical seals)
TSMS41.9 & 40.9 Series Specification
Download
Download Popular Products
Multi Turn Wave Springs with Shim Ends | Over 31 Years Metal Wave Springs & Retaining Rings Manufacturer | Tech Spring Manufacturing Corp.
Based in Taiwan since 1987, Tech Spring Manufacturing Corp. has been one of the prime precision springs | spring manufacturers. Their main products, including Wave Springs, Retaining Rings and Constant Force Springs, which are designed to meet customers' specified dimensions.
ISO accredited and manufacturing all types of springs, stamping molding and assembly of metal parts to Europe, USA, UK & Australia. We are specialized in the manufacturing, designing and analyzing all kinds of spring, such as wave springs (including of compression wave spring, wave single turn and nested spring), linear expander, retaining rings (including of internal, external, single turn and more turns), constant force spring, power springs (including of general and prestressed types), etc
Tech Spring / TSI / TSMC has been offering customers high-quality precision-made springs, both with advanced technology and 31 years of experience, Tech Spring / TSI / TSMC ensures to meet each customer's demands.