Heat Resistant
Wire for use in high temperatures where high strength, creep and stress rupture resistance, oxidation resistance or a combination of these is required.
If you have any questions about material selection, please do not hesitate to contact us. We can provide you with the best solution.
Inconel 718 (For Springs)
A Nickel-Chromium alloy being precipitation hardenable and having high creep-rupture strength at high temperatures to about 700°C (1290°F). It has higher...
Inconel X750 (For Springs)
X750 is a Nickel-Chromium alloy made precipitation hardenable by additions of Al and Ti, having creep-rupture strength at high temperatures to about 700°C...
Nimonic 80A (For Springs)
Nimonic 80A is a Nickel-Chromium alloy which is precipitation hardenable. It has largely been superseded by Nimonic 90 and Inconel X-750, but because of the low Cobalt...
Nimonic 90 (For Springs)
A Nickel-Chromium-Cobalt alloy being precipitation hardenable, having high stress-rupture strength and creep resistance at high temperatures up to about...
Rene 41∞ (For Springs)
Rene 41 is an age hardenable nickel base alloy that has very high strength at elevated temperatures, particularly within the range of 650 – 980°C (1200...
Waspaloy (For Springs)
This age hardenable nickel base super alloy has very good strength in temperatures up to about 980°C (1800°F). It’s strength is generally comparable...