Sub Zero
Wire which has good mechanical properties in low temperature environments, typically materials will be ductile in nature and have good fracture toughness.
If you have any questions about material selection, please do not hesitate to contact us. We can provide you with the best solution.
- Related Products
Multi Turn Wave Springs
Multi Turn (Peak-to Peak) Wave springs are formed by stacking successive round edges of wave layers. The peaks correspond to the peaks. Each peak is neatly...
Details
Constant Force Springs
Constant Force Springs are generally constructed as a pre-stressed flat strip material that is tightly wrapped around a drum or shaft in the center and the hole...
Details
Power Springs
Power springs are sometimes referred to as clock springs, spiral torsion, flat spiral springs, motor springs or brush springs, they are made by tightly...
Details
Precision Stamped Parts & Custom Metal stamping
TSMC is an industry leader in the design and manufacturing of high micro precision parts, or called precision metal stamping, we can formed many different...
Details
CNC Wire form Parts
Wire forming is made by the specific configuration of the spool. They can be used in almost any form, and springs of this type are usually custom-made...
Details
Double Torsion Springs
Torsion springs are a type of coil or helical spring that react to applied rotational forces, providing torque or using stored rotational energy when the spring...
Details
Extension Springs
When the tension spring is formed, the spring coils generate a compressive force with each other. When the tensile force acts on the spring, if the force...
Details
Compression Springs
The cross-section of the spring material used for the compression spring is divided into a circular shape, a rectangular shape, and a multi-strand shape....
Details
CNC Lathes, Precision Turned Parts
We have wide variety of precision machining equipment's, include CNC lathes and CNC Multi-axis lathe, It has strong and exactly hardness in mechanical...
Details
Inconel 718 (For Springs)
A Nickel-Chromium alloy being precipitation hardenable and having high creep-rupture strength at high temperatures to about 700°C (1290°F). It has higher...
Inconel X750 (For Springs)
X750 is a Nickel-Chromium alloy made precipitation hardenable by additions of Al and Ti, having creep-rupture strength at high temperatures to about 700°C...
Nitronic 50 (For Springs)
Nitronic 50 Exhibits corrosion resistance and that is superior to type 316 Stainless Steel. It has good mechanical properties at ambient and sub-zero temperatures....