Corrosion Resistant | Over 31 Years Metal Wave Springs & Retaining Rings Manufacturer | Tech Spring Manufacturing Corp.

Spring-Corrosion-Resistant / Tech Spring Manufacturing Corp. is a high quality Metal Spring Manufacturer in Taiwan, offering Wave Springs, Retaining Rings and Constant Force Spring with good quality and reasonable price.

Spring-Corrosion-Resistant

Corrosion Resistant

Wire for use in corrosive environments such as gases and liquids. Materials which are resistant to chemical attack in acidic, alkaline or complex environments.
If you have any questions about material selection, please do not hesitate to contact us. We can provide you with the best solution.


Result 1 - 12 of 30
Alloy 20 CB 3 (For Springs)

Alloy 20 CB 3 is an austenitic stainless steel with excellent resistance to hot sulphuric acid and many other aggressive environments that would readily...

Duplex (For Springs)

Duplex stainless steels are magnetic and are far more corrosion resistant than more commonly used stainless grades, ie 302 and 316. It can be used for any TSMC...

Hastelloy B-3 (For Springs)

This Nickel-Molybdenum alloy gives excellent resistance to hydrochloric acid at all concentrations and temperatures from ambient to high. It also withstands...

Hastelloy C-4 (For Springs)

This Nickel-Chromium-Molybdenum alloy tolerates high temperatures and gives a design freedom in areas where weld geometry makes excessive heat build-up...

Hastelloy-C-22 (For Springs)

A Nickel-Chromium-Molybdenum alloy with better overall resistance and versatility than any other NiCrMo available. It has excellent resistance to localised...

Hastelloy C-276 (For Springs)

This Nickel-Molybdenum-Chromium alloy with the addition of Tungsten, has excellent corrosion resistance in a wide range of corrosive media and is especially...

Hastelloy C-2000 (For Springs)

This alloy was developed to broaden the application range of one alloy. With the addition of Copper to the Nickel-Chromium-Molybdenum system, Hastelloy...

Hastelloy G-30 (For Springs)

G-30 is a high Nickel based alloy which shows superior corrosion resistance over most other Nickel and Iron based alloys in phosphoric acids as well as many...

Hastelloy X (For Springs)

Hastelloy X is a Nickel-Chromium-Iron-Molybdenum alloy with an exceptional combination of oxidation resistance, ease of fabrication and high temperature...

Incoloy 800 (For Springs)

This Nickel-Iron-Chromium alloy has good strength and excellent resistance to oxidation and carburisation in high temperature atmospheres. Incoloy 800 also...

Incoloy 800HT (For Springs)

This Nickel-Chromium-Iron alloy has the same basic composition as Incoloy 800, but has significantly higher creep rupture strength, resultant from the close...

Incoloy 825 (For Springs)

Incoloy 825 is a Nickel-Iron-Chromium alloy with additions of Molybdenum and Copper. It has excellent resistance to both reducing and oxidising acids,...

Result 1 - 12 of 30