Electrical and Electronic | Over 31 Years Metal Wave Springs & Retaining Rings Manufacturer | Tech Spring Manufacturing Corp.

Spring-Electrical-and-Electronic / Tech Spring Manufacturing Corp. is a high quality Metal Spring Manufacturer in Taiwan, offering Wave Springs, Retaining Rings and Constant Force Spring with good quality and reasonable price.

Spring-Electrical-and-Electronic

Electrical and Electronic

Wire used for High Performance electrical and electronic applications (often in high temperatures), selected for their specific electrical and associated properties.
If you have any questions about material selection, please do not hesitate to contact us. We can provide you with the best solution.


Result 1 - 11 of 11
45/55 Ni Cu Resistance Wire (For Springs)

A Nickel-Copper alloy wire used mainly for its medium range electrical resistivity and very low temperature-coefficient of resistance. 45/55 Ni Cu Resistance...

80/20 Ni Cr Resistance Wire (For Springs)

An alloy wire used at operating temperatures up to 1200°C (2200°F). Its chemical composition gives good oxidation resistance especially under conditions...

Nickel 200 (For Springs)

Nickel 200 is commercially pure and has good mechanical properties and excellent corrosion resistance to alkalis i.e. Sodium hydroxide. It also has good...

Nickel 201 (For Springs)

A commercially pure Nickel (typically 99.6% Nickel), Nickel 201 is essentially the same as Nickel 200, but with a lower Carbon content to prevent embrittlement...

Nickel 270 (For Springs)

A high purity grade of nickel that is made by powder metallurgy. Nickel 270 is also known as HPM 270 Nickel.

Nilo 36 (For Springs)

A Nickel-Iron, low expansion alloy containing 36% Nickel. It maintains near constant dimensions over the range of normal atmospheric temperatures and has a low coefficient...

Nilo 42 (For Springs)

A Nickel-Iron, low expansion alloy containing 42% Nickel. It has a low and nominally constant coefficient of thermal expansion from room temperature to about...

Nilo 48 (For Springs)

A Nickel-Iron, controlled expansion alloy containing 48% Nickel. Its coefficient of thermal expansion was designed to match that of soft lead and soda-lime...

Nilo 52 (For Springs)

Nilo 52 was designed for use with a variety of soft glasses. It is known for its almost constant coefficient of thermal expansion up to approx. 565°C...

Nilo K (For Springs)

A Nickel-Iron-Cobalt, controlled expansion alloy containing 29% Nickel. Its coefficient of expansion (which decreases with rising temperature to the inflection...

Stainless Steel 1.4310 (For Springs)

Stainless Steel 1.4310 is capable of high tensile strength following cold work. It can be used for any TSMC spring product such as wave springs, retaining...

Result 1 - 11 of 11