Monel K-500 (For Springs)
This Nickel-Copper alloy is precipitation hardenable, due to the additions of Aluminium and Titanium. It combines the corrosion resistance of Monel 400 but gives the added advantage of extra strength and hardness (as a result of its age hardening ability). It can be used for any TSMC spring product such as wave springs, retaining rings and compression springs.
Monel® K-500 is also known as Nicorros Al.
Nickel-Copper Base Wire for wire springs, flat springs and wire products
Key Features
- Corrosion resistance similar to Monel 400 but with higher strength and hardness
- Low permeability and is non-magnetic to temperatures as low as -101°C (-150°F )
- Age hardenable
- Good for sea water applications
Typical Applications
Pump Shafts
Fasteners
Marine Propeller Shafts
Oil Well Tools
Instruments
Springs
Approx. Operating Temperature
Chemical Composition
| Element | Ni | Fe | Mn | C | Cu | Si | S | Co | Ti | Al |
|---|---|---|---|---|---|---|---|---|---|---|
| Min % | 63.00 | – | – | – | 27.00 | – | – | – | 0.35 | 2.30 |
| Max % | 70.00 | 2.00 | 1.50 | 0.25 | 33.00 | 1.00 | 0.01 | 2.00 | 0.85 | 3.20 |
Wire Type
- Round
- Flat Wire
- Shaped Wire
- Rope/Strand
Specifications
- ASTM B865
- BS 3075 NA 18
- BS 3076 NA 18
- ISO 15156-3 (NACE MR 0175)
- QQ-N-286
Designations
- W.Nr 2.4375
- UNS N05500
- AWS 041
- Related Products
Multi Turn Wave Springs
Multi Turn (Peak-to Peak) Wave springs are formed by stacking successive round edges of wave layers. The peaks correspond to the peaks. Each peak is neatly...
Details
Constant Force Springs
Constant Force Springs are generally constructed as a pre-stressed flat strip material that is tightly wrapped around a drum or shaft in the center and the hole...
Details
Power Springs
Power springs are sometimes referred to as clock springs, spiral torsion, flat spiral springs, motor springs or brush springs, they are made by tightly...
Details
Precision Stamped Parts & Custom Metal stamping
TSMC is an industry leader in the design and manufacturing of high micro precision parts, or called precision metal stamping, we can formed many different...
Details
CNC Wire form Parts
Wire forming is made by the specific configuration of the spool. They can be used in almost any form, and springs of this type are usually custom-made...
Details
Double Torsion Springs
Torsion springs are a type of coil or helical spring that react to applied rotational forces, providing torque or using stored rotational energy when the spring...
Details
Extension Springs
When the tension spring is formed, the spring coils generate a compressive force with each other. When the tensile force acts on the spring, if the force...
Details
Compression Springs
The cross-section of the spring material used for the compression spring is divided into a circular shape, a rectangular shape, and a multi-strand shape....
Details
CNC Lathes, Precision Turned Parts
We have wide variety of precision machining equipment's, include CNC lathes and CNC Multi-axis lathe, It has strong and exactly hardness in mechanical...
Details