Engineering Design

Custom products are a specialty of TSMC (Tech Spring Manufacturing Corp.), as a full service precision manufacturing company, our experienced engineers have extensive knowledge of custom parts, they are always available to assist you to conduct a comprehensive functional analysis of development and gives a feasible solution through our own formula from the preliminary design phase to fabrication that meets your application needs.

There are four critical factors when considering a wave spring design such as Bore/ shaft (ID/OD), Load, Working height at which the load is applied and Material desired, as well as the other input parameters that contain the wire thickness, wire radial wall, number of waves per turn, active number of turns, work height, load at work height ... The input data as shown on the left table. And calculation results with spring rate (stiffness), working load (±10%), outer diameter at solid height, Working curve and Life cycles prediction where found in the down table.

Whether you need a standard or custom wave springs, please send us your application requirement, our experts will hand-select or commend the best solution for your specific needs.

Related Products

Multi Turn Wave Springs

Multi Turn (Peak-to Peak) Wave springs are formed by stacking successive round edges of wave...

Details

Multi Turn Wave Springs with Shim Ends

TSMC Multi Turn Wave springs are available with squared-shim ends. In comparison to the plain...

Details

Interlaced Wave Springs

An Interlaced Wave Spring is consisted of two wave springs with similar thickness, amplitude...

Details

Single Turn Wave Spring

Single-turn wave springs are used for several applications, mainly designed for short deflection...

Details

Round Wire Wave Springs

TSMC Round Wire Wave Springs are manufactured from round-section wire, it can develop higher...

Details

Linear Wave Springs

TSMC Linear Wave Springs are a strip-shaped spring by continuously wave shapes, which has the same...

Details

Related Materials

Corrosion Resistant

Wire for use in corrosive environments such as gases and liquids. Materials which are resistant to chemical attack in acidic, alkaline or complex environments. If...

Electrical and Electronic

Wire used for High Performance electrical and electronic applications (often in high temperatures), selected for their specific electrical and associated...

Strength

Wire for withstanding high loads and / or stresses and those with good strength to weight ratios. In many cases, mechanical properties can be further increased...

Water Resistant

Wire which performs well in aqueous environments. Materials which are resistant to corrosion in subsea or other application areas; where exposure to moisture...

Heat Resistant

Wire for use in high temperatures where high strength, creep and stress rupture resistance, oxidation resistance or a combination of these is required. If...

Controlled / Low Expansion

Wire which has a low or controlled rate of thermal expansion at room temperature, often used in metal to glass sealing or electronic applications. If you have...

Electrical Resistance Wire

Wire used where linear electrical resistance can be achieved through selection of different sizes and shapes. Often used in heating elements or resistors. If...

Hot Cutting and Sealing

Wire used typically for packaging and cutting applications. Materials which have electrical resistance properties which allow them to efficiently reach...

Sub Zero

Wire which has good mechanical properties in low temperature environments, typically materials will be ductile in nature and have good fracture toughness. If...

Specific Applications

Wire that has properties that lend themselves extremely well to being tailored to very specific applications; examples might include medical devices or watch...